SC-SuperSolv Safety Solvent

 

DESCRIPTION: SC-SuperSolv is a non-evaporative solvent  that  safely  removes  most  organic and inorganic soils without damaging the cleaning surface. With a Kauri Butinol (KB) value estimated in excess of 150, SC-SuperSolv removes lubricants, brake fluid, engine oil, lithium grease, paint, permanent marker, and certain adhesives. SC-SuperSolv is non-aromatic and contains no ozone depleting chemicals. SC-SuperSolv is an organic, antioxidant solvent that will not harm most plastics, vinyl, nylon, butene, rubber, ferrous metals or natural fibers. SC-SuperSolv is water miscible and works effectively in ultrasonic cleaners and automatic parts cleaners. SC- SuperSolv complies with:

  • USDA BioPreferred® Program
  • EU REACH Pre-registered
  • OSHA 29-CFR Ch. XVII 1910.1200 and 40 CFR Ch. 1, Subparts C & D
  • USEPA 600, 4-90, 027 for aquatic toxicity
  • USEPA 601 & 602 for VOC testing
  • US DOT: Class 55, Liquid Cleaning Compounds

 

SC-SuperSolv is a powerful replacement for:

  • 1,1,1-Trichloroethane, TCA ▪ Trichloroethylene, TCE
  • Toluene, Methyl benzene     ▪ Perchlorochylene
  • Methyl Chloride                   ▪ Stoddard Solvent
  • Glycol Ethers, Butyl Cellosolve

 

 

INSTRUCTIONS: SC-SuperSolv is a powerful solvent and should be pre-tested prior to use especially on soft metals. SC-SuperSolv may be used full-strength or diluted with water depending on the specific application. When water is added, SC- SuperSolv will become more of a release agent and less of a solvent. SC- SuperSolv may be spray applied, or applied by a cloth, and wiped from the cleaning surface. Less product may be necessary with increased temperature, dwell time and/or agitation. Rinse thoroughly with water to remove soil and residual product.

Suggested Dilutions: Heavy Cleaning 100% – 50%

        Average Cleaning 50% – 20%

        Routine Maintenance 10% – 2%

 

SAFE CARE® PRODUCTS ARE:

  • Non-toxic
  • Non-reactive
  • Non-carcinogenic
  • Readily biodegradable
  • Derived from renewable resources
  • Safe to use, store and dispose of

 

SAFE CARE® PRODUCTS DO NOT CONTAIN:

  • Petroleum distillates
  • Glycol ethers
  • Terpenes
  • Synthetics
  • Builders & reagents
  • Caustics

BASIC PROPERTIES:

Appearance: Clear, amber liquid Odor: Mild surfactant Water Solubility: 100% Soluble

Boiling Point: 105ºC (222ºF) (ASTM D1120) Flash Point: None (ASTM D93 Closed Cup) Specific Gravity: ~1.05 @60/60° F (ASTM D891) pH Range: 10.0 – 11.0 (ASTM E70)

 

The information contained herein is believed to be correct including test data conducted under controlled laboratory conditions. Users of SAFE CARE products should perform their own test(s) to determine the suitability of the product for their specific application(s).